Inserting nano SIM and microSD cards
§ Use a standard nano SIM only. Don't cut a larger SIM card to fit. It's thicker than a standard
nano SIM card and may get stuck in the slot.
§ The microSD
™
card is optional and sold separately.
§ If you're using your old microSD card, make sure you have backups of your content on a
computer or cloud storage before inserting the card. You may be prompted to format the card.
1. Hold the phone face up.
2. Insert the tip of the tray eject tool that came with your phone—or a small bent paperclip—
into the tray eject hole.
When inserting the eject tool into the tray eject hole to remove the card tray, do not obstruct
the tray to avoid damaging the eject mechanism inside the slot.
3. Push the tip into the hole until the tray ejects, and then pull the tray out.
10 Unboxing and setup
To Next Page
Loading...
