Check that the headset cable strip is properly attached. For details, see Reattaching the
headset cable strip to the back pad on page 18.
You'll hear a click when the tabs are inserted.
Make sure to minimize the gap between the pad and the band.
Reattaching the headset cable strip to the back pad
The fabric strip guides the headset cable, and is inserted on the back pad.
1. Insert the back pad tabs second to the left-most corner tabs into the holes of the headset
cable strip with its flap down. Make sure that the strip is firmly attached.
2. Reattach the top strap to the headset band. For details, see Attaching the top strap to the
headset band on page 21.
18 Headset and headphones
To Next Page
Loading...
