18
●Real-time air consumption show the basic unit of m³/h
●Real-time hot water production show the basic unit of L/min
●Cumulative amount of using water and gas consumption show the basic unit of m³, When the
display numbers reach 999m³,water record is automatically cleared.For example, when the
query information display "Water production 180m³", represents a total cumulative amount of
water heater 180m³.When real-time information shows "volume 8.3m³", it indicates the water
heater cumulative total air consumption 8.3m³.
●Cumulative gas consumption and cumulative amount of water is automatically cleared after
power failure.
●The contents of the query function display only for reference, can not be used for
measurement.
7. Timing protection function(only used for the water heater with timing protection)
When the water heater continue working 40 minutes, will be enter security protection statement
with off timer, this is a normal phenomenon, to remind the user to use the environment
ventilation. If need to continue using, turn off the water valve then open again.
To Next Page
Loading...
Need help?
General
