3 If the Bluetooth connection between the watch and the phone disconnects and the WLAN
is unavailable, the watch will then use the eSIM mobile network.
Connecting to the Internet via Bluetooth
If the watch is connected to the phone using the Health app and the app is running in the
background, the watch will use the phone's network by default.
This feature is not supported on an iOS phone.
Connecting to the Internet via a WLAN
If the watch is connected to the Internet via a WLAN, you can use an app on your watch to
make MeeTime calls when you are not carrying the phone.
1 Press the Up button on your watch to open the app list, go to Settings > WLAN, and turn
on the WLAN switch. The watch will then automatically scan for available WLANs.
2 Touch the WLAN you want to connect to, enter the password, and touch Connect.
Connecting to the Internet via an eSIM
To connect to the Internet via an eSIM, you need to enable the eSIM service rst.
Press the Up button on your watch to open the app list, go to Settings > Mobile network >
Mobile data, and turn on the switch for Mobile data.
Ignoring the connected WLAN
1 Press the Up button on your watch to open the app list and then go to Settings > WLAN.
2 Select the connected WLAN and touch Forget.
Airplane mode
When taking a ight, enable Airplane mode as required by the airline. After Airplane mode
is enabled, your watch will disable Bluetooth, WLAN, and the mobile network.
You can enable or disable Airplane mode using either of the following methods:
• Swipe down from the top of the home screen to open the shortcut menu, and touch the
Airplane mode icon to turn it on or o.
• Press the Up button on your watch to open the app list, go to Settings > Mobile network,
and enable or disable Airplane mode.
Getting started
8
To Next Page
Loading...
Need help?
General
