Changing the eSIM Service
Only one eSIM can be activated for your device. To change the service, you need to reset the
service on the eSIM management screen of the watch and activate another service.
Resetting the service will remove the eSIM information from your watch but will not
deregister from your carrier's service. To deregister from your carrier's service, contact your
carrier.
Changing the eSIM number or the watch
Changing the eSIM number after the eSIM service has been activated on the watch
1 Deregister the eSIM number and remove the eSIM from the watch.
2 Use a new phone number to activate the eSIM service on the watch.
Replacing watch A (enabled with the eSIM service) with watch B
1 Deregister from the eSIM service on watch A and remove the eSIM from watch A.
2 Activate the eSIM service on watch B.
Using your watch to make calls
The watch supports making Bluetooth calls and eSIM calls to meet call requirements in
dierent scenarios.
When the watch is connected to your phone via Bluetooth, you can use the watch to make or
answer calls through the primary number of your phone.
If the Bluetooth connection disconnects and the eSIM service is enabled on the watch, you
can make or answer calls through the eSIM number that has been activated on the watch.
Answering or rejecting a call on your watch
When you receive an incoming call, the watch will notify you and display the caller's
information. You can choose to answer or reject the call.
Making a call on your watch
MeeTime is only supported on phones running HarmonyOS 2/EMUI 11.0 or later.
MeeTime is only supported in certain countries or regions. For details, contact the ocial
customer service.
You can make a call in one of the following ways:
• Using the voice assistant: Press and hold the Down button on your watch to wake up the
voice assistant and say:
• "Call Zichen."
• "Dial 950800."
Calling
13
To Next Page
Loading...
Need help?
General
