Need help?Do you have a question about the Huawei SUN2000 3,6KTL-L1 and is the answer not in the manual?
General| Max. efficiency | 98.4% |
|---|---|
| Dimensions (W x H x D) | 365 x 365 x 156 mm |
| Operating temperature range | -25°C to +60°C |
| IP rating | IP65 |
| Topology | Transformerless |
| Nominal AC voltage | 230 V |
| Max. input voltage | 600 V |
| Max. input current per MPPT | 11 A |
| Number of MPP trackers | 2 |
| Max. short-circuit current per MPPT | 15 A |
| Cooling | Natural convection |
| Maximum Input Current | 22 A |
| Rated AC power | 3600 W |
| Max. apparent power | 3600 VA |
| Communication interfaces | RS485 |
| MPP voltage range | 90 V - 560 V |
| Maximum Output Power | 3600 W |
| MPPT Voltage Range | 90 V to 560 V |
Details the various components and ports of the solar inverter.
Specifies the space and angle requirements for device installation.
Details the initial steps for installing the solar inverter unit.
Information on preparing various types of cables for connection.
Instructions for connecting the protective earthing (PE) cable.
Guidance on installing communication modules like WLAN antennas or Smart Dongles.
Steps for installing the WLAN antenna for wireless communication.
Steps for installing the 4G Smart Dongle for cellular communication.
Detailed instructions for connecting the AC output power cable.
Process for connecting the AC output power cable to its connector.
Instructions for connecting the DC input power cables.
Steps to assemble the positive and negative DC connectors.
Process for connecting the assembled DC input power cables.
Instructions for connecting battery cables, if applicable.
Guidance on connecting signal cables for communication.
Detailed instructions on how to connect signal cables to the COM port.
Checklist of criteria to verify the installation is correct and secure.
Explains the meaning of various LED indicators for system status, communication, and faults.
Instructions on how to download the required mobile application.
Steps for registering an installer account for system management.
Process for creating a PV plant and assigning an owner in the system.
Guide to setting up the physical layout for PV optimizers via server or inverter.
Detailed steps for logging into the management system via the web.
Instructions for configuring battery parameters.
Frequently asked questions and guidance on device commissioning.
Contact details for customer support by region and country.
To Next Page