4. If the encryption p
arameter is set for the gateway, the Wireless Network Connection
dialog box is displayed and requires the network key and confirmation. The value you
entered must be consistent with the WPA Pre-Shared Key or Network Key of the
gateway.
5. W
ait for several minutes after you enter the correct network key. The wireless
connection icon displays in the status area in the lower right corner of the screen. Then,
your PC can automatically connect to the gateway.
Configuring the PC Network
The recommended configurations of the gateway are as follows:
y Obtain an IP
address automatically.
y Deselect Use a pr
oxy server for your LAN.
11
To Next Page
Loading...
