27
y e terminals (PCs) connecting to the gateway through the WLAN cannot access
f you do not know which
arch for the channel.
Confi the 802.11 Mode
T ur availabl
Enabling or Disabling the AP Isolation
On: Th
each other.
Of
f:y
The terminals (PCs) connecting to the gateway through the WLAN can access each
other.
Selecting the Country
Country: It is used to identify the country. Different countries have different standards on
channel usage.
Selecting the WLAN Channel
Channel: It refers to the channel that the gateway works with. I
channel to select, select Auto and the gateway can automatically se
guring
here are fo e modes, as shown in the following table.
Mode Description
54g Auto The WLAN has the best compatibility in this mode.
54g Performance The WLAN has the best performance in this mode.
54g LRS lties in communicating with devices
conforming to the IEEE 802.11b standards, select this mode.
If the gateway has difficu
802.11b Only The gateway can only work in the low performance 802.11b
standard network mode.
Configuring the Transmission Rate
1. Select Auto, the gateway automatically searches the transmission rate.
2. Click to submit the setting.
3. Click Advanced to config
ure the advanced WLAN setting.
tings Advanced WLAN Set
You can configure the security and Network Bridge.
Configuring Security Key
A security key can protect your WLAN from illegal data attacking. The security key o
wireless gateway must be consistent with that of the PC.
f your
To Next Page
Loading...
