Do you have a question about the Huawei 3G Wireless Gateway and is the answer not in the manual?
LAN Interface | Ethernet |
---|---|
Number of LAN Ports | 4 |
Antenna Type | Internal |
Security | WEP, WPA, WPA2 |
Wi-Fi Standard | 802.11b/g |
Guides users on how to access the gateway's management interface by logging in.
Explains the different areas of the gateway management page interface.
Explains the status indicators for SIM, WAN, WCDMA, and signal strength.
Guides the user through the initial configuration process using a wizard.
Provides instructions on how to establish an internet connection with the gateway.
Details the process of validating the PIN code for SIM card security.
Explains how to view current configuration and network status parameters.
Guides users on setting up PPP profile parameters for internet connectivity.
Explains how to choose the dial-up access mode for the gateway.
Provides instructions for configuring the wireless local area network (WLAN) settings.
Details how to set up wireless security using encryption methods like WEP, WPA-PSK, WPA2-PSK.
Describes how to finalize and submit the configurations made during the Quick Setup process.
Explains how to configure your PC for wireless connection to the gateway.
Step-by-step guide to connect your computer to the wireless network.
Details recommended network settings for the PC to connect to the gateway.
Steps to configure the local area connection properties on your computer.
Instructions to disable proxy server settings for your LAN connection.
Access system management features like password, software upgrade, and factory defaults.
Manage PIN code operations and SIM card settings.
Configure network search mode and band for UMTS connectivity.
Configure PPP dial-up properties and manage connection profiles.
Configure IP address assignment modes via DHCP.
Enable or disable the wireless LAN module.
Configure general wireless LAN settings.
Configure MAC address filtering for WLAN security.
Instructions to change the gateway's login password for security.
Steps to update the gateway's system software with a new version.
Resets the gateway to its original factory settings, reverting all configurations.
Provides instructions on how to reboot or restart the gateway device.
Displays hardware and software version details of the gateway.
Guides on how to enable or disable the PIN code protection for the SIM card.
Instructions for unlocking the SIM card when the PIN code is locked, using the PUK code.
Explains how to change the existing PIN code for the SIM card.
Select preferred connection modes and frequency bands for network searching.
Configures how the gateway searches and registers with available networks.
Configure PPP settings, including profile list, connection mode, and authentication.
Create, edit, save, and delete dial-up connection profiles.
Turn the WLAN module on or off.
Configure general wireless LAN settings.
Understand how SSIDs and MAC addresses identify the wireless gateway.
Control whether the WLAN's SSID is broadcasted for network discovery.
Controls whether connected wireless devices can communicate with each other.
Set the country to comply with local channel usage standards.
Choose the wireless channel for gateway operation.
Select the wireless operating mode (e.g., 54g Auto, 54g Performance).
Configure the wireless transmission rate.
Set up authentication methods for wireless network access (Open, Shared).
Select encryption modes like WEP, WPA-PSK, WPA2-PSK for wireless security.
Configure client access attributes such as Preamble Type, Associations Limit, and Mode.
Set up MAC address filtering to control network access.
Defines modes for MAC address filtering (Disabled, Allow, Deny).
Enables or disables the gateway's firewall, the main security switch.
Configure MAC address filtering for the Local Area Network.
Configure IP address filtering to block specific IPs from accessing the LAN.
Configure virtual servers to allow external access to services on the LAN.
Configure the DMZ service to expose a local computer to the Internet.
Configure Universal Plug and Play (UPnP) settings for network features.
Set up remote access and control of the gateway over the internet.
Troubleshoots issues preventing a PC on the LAN from accessing the internet.
Troubleshoots problems with a PC connecting to the wireless network.
Provides a solution for users who forget the gateway's LAN interface IP address.
Offers solutions for issues encountered when bridging two gateways.
Addresses low download speeds when signal strength is adequate.
Precautions for using the device near electronic equipment.
Safety guidelines for using the device in hospitals or healthcare facilities.
Safety advice related to using the device while driving or in vehicles.
Guidelines for storing the device and its accessories safely.
Safety precautions for keeping the device away from children.
Recommendations for operating the device in various environmental conditions.
Instructions for cleaning and maintaining the wireless device.