4. Wait for several minutes, if you are prompted that the connection is successful, you can
start the IE browser and enter the website address to access the Internet.
Validating the PIN Code
If the PIN code protection is enabled, you are prompted to validate the PIN code when you
restart the gateway and log in to the management page.
6
1. Enter the correct PIN code, and then click
.
Note:
y For the initial P
IN code, consult your service provider.
y If y
ou enter wrong PIN codes for three successive times, the PIN is locked. For
details, see "Unlocking the PIN Code."
y I
f the PIN validation fails, you cannot use the network-related functions.
2. When you succeed in validating the PIN code, click to access the network
connection page.
Viewing the Gateway Configuration Information
On the gateway configuration page, you can view the current parameter configuration
information of the gateway and the network connection status. The network connection
status includes WAN, LAN, and WLAN.
1. Click Basic S
tatus in the operation navigation area.
2. Click
on the right part of the page to view the status of the gateway.
3. Click to view the current status of the gateway on the
advanced status
page.
To Next Page
Loading...
