Huawei 3G Wireless Gateway - What to do if bridging between two gateways is unsuccessful; When the signal strength is normal, what to do if the downloading rate is much lower

What to do if bridging between two gateways is unsuccessful
1. Make sure that the two gateways work on the same channel. For details, see "Selecting
the WLAN Channel."
2. M
ake sure that the MAC address of one gateway is in the peer MAC address list of
another gateway. For details, see "Configuring Access Attributes of the Client."
When the signal strength is normal, what to do if the downloading
rate is much lower
In this case, you may need to set the value in registry as following procedure.
1. Click St
art and then select Run.
2. Ty
pe regedit in the Open text box and then click OK.
3. Select Par
ameters under the following directory:
\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip.
4. Select Edi
t > New > DWORD Value.
37