Huawei AP4030DN

Huawei AP4030DN
Hardware Installation and Maintenance Guide
2 AP Installation
Issue 02 (2015-05-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6
2 AP Installation
2.1 Preparing for Installation
This section describes safety precautions and tool preparations for AP installation.
Safety Precautions

Take proper measures to prevent injuries and device damage.

Place the device in a dry and flat position away from any liquid and prevent the device
from slipping.

Keep the device clean.

Do not put the device and tools in the aisles.
Only the qualified personnel are permitted to install and remove the device and its accessories.
Before installation and operation, read the safety precautions carefully.
Tool Preparation
To install APs, prepare tools listed in Table 2-1.
Table 2-1 Tools
Phillips screwdriver
(M3-M6)
Torque screwdriver
3mm/5mm
(M3-M6)
Marker
Hammer drill (φ6)
Utility knife
Cable cutter