Huawei AR1200 Series - Binding a Radio Profile to a Radio; Optional) Configuring AP Radio Resource Management

The radio rate is set.
Step 6 (Optional) Run:
power-mode { auto | fixed }
The radio power mode is set.
The default power mode is auto. In this mode, the power of radios using the radio profile is set
automatically based on the WLAN radio environment.
Step 7 (Optional) Run:
channel-mode { auto | fixed }
The channel mode is set.
The default channel mode is auto. In this mode, channels are selected for radios using the radio
profile automatically based on the WLAN radio environment.
Step 8 Run:
wmm-profile { id profile-id | name profile-name }
A WMM profile is bound to the radio profile.
NOTE
A radio profile can be applied to a radio only after a WMM profile is bound to the radio profile.
----End
1.3.4 Binding a Radio Profile to a Radio
After a radio profile is bound to a radio, parameters defined in the radio profile are applied to
the radio.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface wlan-radio 0/0/0
The radio view is displayed.
Step 3 Run:
radio-profile { id profile-id | name profile-name }
A radio profile is bound to the radio.
----End
1.3.5 (Optional) Configuring AP Radio Resource Management
An AP manages radio resources by selecting channels for radios, adjusting the radio transmission
power, and calibrating radio parameters.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - WLAN 1 WLAN Configuration
Issue 03 (2012-01-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9