Huawei AR1200 Series - Configuration Examples; Example for Configuring Security Policies

------------------------------------------------------------------------------
Total number: 2
l Run the display sta-whitelist command to view the STA whitelist.
Check the STA whitelist.
<Huawei> display sta-whitelist
Station mac global white list
information:
------------------------------------------------------------------------------
ID
MAC
------------------------------------------------------------------------------
0 0025-9e26-
b9bd
1 001e-907a-
b6a6
2
0026-0000-90a1
------------------------------------------------------------------------------
Total number: 3
2.5 Configuration Examples
2.5.1 Example for Configuring Security Policies
Networking Requirements
As shown in Figure 2-3, the AR1200 functions as a fat AP and provides WLAN services for
access users. Five WLANs are available for the users. The requirements are:
l Open system authentication and no encryption are used on the WLAN with the SSID
huawei-1.
l Shared key authentication and WEP-40 encryption are used on the WLAN with the SSID
huawei-2.
l WPA1 authentication and TKIP encryption are used on the WLAN with the SSID huawei-3.
l WPA2 authentication and CCMP encryption are used on the WLAN with the SSID
huawei-4.
l WAPI authentication is used on the WLAN with the SSID huawei-5.
Figure 2-3 Networking diagram of security policy configurations
Network
BRAS
Router
(FAT AP)
RADIUS Server
STA1
STA2
STA3
STA4
STA5
Huawei AR1200 Series Enterprise Routers
Configuration Guide - WLAN 2 WLAN Security Configuration
Issue 03 (2012-01-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
33