Huawei AR1200 Series - Logging In to the router Through a Mini USB Port

Procedure
l Run the display wmm-profile { all | id profile-id | name profile-name } command to view
information about a WMM profile.
l Run the display radio-profile { all | id profile-id | name profile-name } command to view
information about a radio profile.
l Run the display binding radio-profile { id profile-id | name profile-name } command to
view information about the radios bound to a radio profile.
l Run the display actual channel-power interface wlan-radio0/0/0 command to view the
channel and power of a radio.
l Run the display radio config interface wlan-radio0/0/0 command to view the
configuration of a radio.
----End
1.4 Configuring the WLAN Service
After an AP goes online, it provides different services for users based on parameters configured
in the bound VAP.
1.4.1 Establishing the Configuration Task
Before configuring the WLAN service, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the data required for the configuration. This
can help you complete the configuration task quickly and accurately.
Applicable Environment
If users need to access an Ethernet network by using wireless devices, the WLAN service must
be configured. For the WLAN service configuration roadmap, see 1.2 WLAN Features
Supported by the AR1200.
Pre-configuration Tasks
Before configuring the WLAN service, complete the following tasks:
l Configuring the WLAN radio environment according to 1.3 Configuring the WLAN
Radio Environment
Data Preparation
To configure the WLAN service, you need the following data.
No.
Data
1 WLAN-BSS interface number
Huawei AR1200 Series Enterprise Routers
Configuration Guide - WLAN 1 WLAN Configuration
Issue 03 (2012-01-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11