Encryption : WEP-40
Key 0 : *****
Key 1 : Empty
Key 2 : Empty
Key 3 : Empty
Default key ID : 0
------------------------------------------------------------
WPA's configuration
Authentication : WPA 802.1x + PEAP
Encryption : TKIP
------------------------------------------------------------
WPA2's configuration
Authentication : WPA2 802.1x + PEAP
Encryption : CCMP
------------------------------------------------------------
WAPI's configuration
CA certificate filename : -
ASU certificate filename : -
AC certificate filename : -
AC private key filename : -
Authentication server IP : -
Authentication method : WAPI PSK
WAI timeout(s) : 60
BK update interval(s) : 43200
BK lifetime threshold(%) : 70
USK update interval(s) : 600
USK update packet(k) : 10
MSK update interval(s) : 86400
MSK update packet(k) : 10
Cert auth retrans count : 3
USK negotiate retrans count : 3
MSK negotiate retrans count : 3
USK update method : Time-based
MSK update method : Time-based
------------------------------------------------------------
2.4 Configuring the STA Blacklist and Whitelist
By configuring the STA blacklist and whitelist, you can control STA access.
Applicable Environment
To prevent some STAs from accessing a WLAN network, add them to the STA blacklist. To
allow some STAs to access a WLAN, add them to the STA whitelist.
Pre-configuration Tasks
Before configuring the STA blacklist and whitelist, complete the following tasks:
l Configuring basic WLAN attributes according to 1.4 Configuring the WLAN Service
Data Preparation
To configure the STA blacklist and whitelist, you need the following data.
No.
Data
1 AP ID and STA's MAC address
Huawei AR1200 Series Enterprise Routers
Configuration Guide - WLAN 2 WLAN Security Configuration
Issue 03 (2012-01-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
31
To Next Page
Loading...
