Huawei AR1200 Series - Page 39

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
wlan
The WLAN view is displayed.
Step 3 Configure the blacklist and whitelist.
l Configure the blacklist.
1. Run:
sta-access-mode { blacklist | whitelist | disable }
The STA access control mode is set to blacklist.
By default, the STA access control mode is disable.
2. Run:
sta-blacklist mac-address
The STA is added to the blacklist.
l Configure the whitelist.
1. Run:
sta-access-mode { blacklist | whitelist | disable }
The STA access control mode is set to whitelist.
By default, the STA access control mode is disable.
2. Run:
sta-whitelist mac-address
The STA is added to the whitelist.
----End
Checking the Configuration
l Run the display sta-access-mode command to check the STA access control mode.
Check the STA access control mode.
<Huawei> display sta-access-mode
Station access control mode: disable
l Run the display sta-blacklist command to view the STA blacklist.
Check the STA blacklist.
<Huawei> display sta-blacklist
Station mac global black list
information:
------------------------------------------------------------------------------
ID
MAC
------------------------------------------------------------------------------
0
0026-0000-90a1
1
0026-0000-909f
Huawei AR1200 Series Enterprise Routers
Configuration Guide - WLAN 2 WLAN Security Configuration
Issue 03 (2012-01-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
32