Huawei AR1200 Series - CLI Overview

Context
A service set defines key service parameters. After the service set is bound to a specified radio
on an AP, the service parameters are applied to a WLAN service entity, namely, a virtual access
point (VAP).
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
wlan
The WLAN view is displayed.
Step 3 Run:
service-set { name service-set-name | id service-set-id }
*
A service set is created.
Step 4 Run:
ssid ssid
The SSID is specified the service set.
Step 5 (Optional) Run:
ssid-hide
SSID hiding in a Beacon frame is enabled.
Step 6 Run:
security-profile { name profile-name | id profile-id }
*
A security profile is bound to the service set.
Step 7 Run:
traffic-profile { name profile-name | id profile-id }
*
A traffic profile is bound to the service set.
NOTE
The security profile and traffic profile bound to a service set apply to all users using the service set.
Step 8 Run:
wlan-bss wlan-bss-number
A WLAN-BSS interface is bound to the service set.
----End
1.4.6 Configuring a VAP
When a virtual access point (VAP) is delivered to an AP, the service set parameters in the VAP
are delivered to the AP. The AP then provides services for users.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - WLAN 1 WLAN Configuration
Issue 03 (2012-01-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
18