Huawei AR1200 Series - Configuring a Traffic Profile

1.4.4 Configuring a Traffic Profile
To apply the priority mapping and traffic suppression functions to a virtual access point (VAP),
create a traffic profile and bind the traffic profile to a service set.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
wlan
The WLAN view is displayed.
Step 3 Run:
traffic-profile { name profile-name | id profile-id }
*
A traffic profile is created.
After a traffic profile is created, parameters in the profile use default values. To view the
configuration of a traffic profile, run the display traffic-profile { all | id profile-id | name
profile-name } command.
View attributes of the traffic profile traffic-profile-1.
[Huawei-wlan-view] display traffic-profile name traffic-
profile-1
Profile ID : 3
Profile name : traffic-profile-1
Client Limit Rate : 4294967295 Kbps(up)
: 4294967295 Kbps(down)
VAP Limit Rate : 4294967295 Kbps(up)
: 4294967295 Kbps(down)
802.1p Mapping Mode: mapping
----------------------------
User-priority 802.1p
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
----------------------------
802.1p to User-priority Mapping List:
----------------------------
802.1p User-priority
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
----------------------------
Tunnel priority(up) Mapping Mode:ToS(inner) to ToS(outer)
----------------------------
ToS(inner) ToS(outer)
0 0
1 1
Huawei AR1200 Series Enterprise Routers
Configuration Guide - WLAN 1 WLAN Configuration
Issue 03 (2012-01-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
16