Table 2-1 Data plan
Item Data
Security policies
l Security profile: security-1
l SSID: huawei-1
l Authentication mode: WEP open system
authentication and no encryption
l Security profile: security-2
l SSID: huawei-2
l Authentication mode: WEP shared key
authentication
l Encryption mode: WEP-40 encryption
Key phrase: 12345
l Security profile: security-3
l SSID: huawei-3
l Authentication mode: WPA1 authentication (802.1x
+PEAP)
l Encryption mode: TKIP encryption
l Security profile: security-4
l SSID: huawei-4
l Authentication mode: WPA2 authentication (802.1x
+PEAP)
l Encryption mode: CCMP encryption
l Security profile: security-5
l SSID: huawei-5
l Authentication mode: WAPI authentication
(certificate authentication)
l ASU server's IP address: 10.10.10.1
Prerequisite
l The AP certificate file huawei-ap.cer, ASU certificate file huawei-asu.cer and Issuer
certificate file huawei-issuer.cer have been saved in the flash card of the AP.
Configuration Roadmap
The configuration roadmap is as follows:
1. Enable 802.1x authentication and configure AAA globally.
2. Create security profiles and configure security policies so that STAs access different
WLANs by using different security policies.
3. Create service sets, bind security profiles to them, and specify SSIDs for them.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - WLAN 2 WLAN Security Configuration
Issue 03 (2012-01-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
34
To Next Page
Loading...
