Huawei AR1200 Series - Page 50

Applicable Environment
A STA communicates with an AP by sending radio signals over a channel. To provide
differentiated services for wireless users, configure a Wi-Fi multimedia (WMM) profile.
Pre-configuration Tasks
Before configuring a radio QoS policy, complete the following tasks:
l Configuring basic WLAN attributes according to 1.4 Configuring the WLAN Service
Data Preparation
To configure a radio QoS policy, you need the following data.
No. Data
1 WMM profile name or WMM profile ID
2 (Optional) WMM EDCA parameters for STAs: arbitration
inter frame spacing number (AIFSN), exponent form of
minimum contention window (ECWmin), exponent form of
maximum contention window (ECWmax), and transmission
opportunity limit (TXOPLimit)
3 (Optional) WMM EDCA parameters for APs: AIFSN,
ECWmin, ECWmax, and TXOPLimit
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
wlan
The WLAN view is displayed.
Step 3 Run:
wmm-profile { id profile-id | name profile-name }
*
A WMM profile is configured.
After a WMM profile is created, parameters in the profile use default values. To view the
configuration of a WMM profile, run the display wmm-profile { all | id profile-id | name
profile-name } command.
The following information shows the default configuration of the WMM profile wp.
[Huawei-wlan-view] display wmm-profile name wp
Profile ID : 2
Profile name : wp
WMM switch : enable
Client EDCA parameters:
---------------------------------------------------
Huawei AR1200 Series Enterprise Routers
Configuration Guide - WLAN 3 WLAN QoS Configuration
Issue 03 (2012-01-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
43