Huawei AR1200 Series - Page 53

Profile ID : 3
Profile name : traffic-profile-1
Client Limit Rate : 4294967295 Kbps(up)
: 4294967295 Kbps(down)
VAP Limit Rate : 4294967295 Kbps(up)
: 4294967295 Kbps(down)
802.1p Mapping Mode: mapping
----------------------------
User-priority 802.1p
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
----------------------------
802.1p to User-priority Mapping List:
----------------------------
802.1p User-priority
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
----------------------------
Tunnel priority(up) Mapping Mode:ToS(inner) to ToS(outer)
----------------------------
ToS(inner) ToS(outer)
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
----------------------------
Tunnel priority(down) Mapping Mode:ToS(inner) to ToS(outer)
----------------------------
ToS(inner) ToS(outer)
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
----------------------------
NOTE
When receiving an 802.3 packet from the Ethernet network, the AP converts the 802.3 packet into an 802.11
packet and forwards it to the STA. The user priority in the packet is determined by DSCP-CoS mapping
or set in a traffic classifier.
Step 4 (Optional) Run:
8021p { designate value | up-mapping value0 value1 value2 value3 value4 value5
value6 value7 }
The 802.1p priority of 802.3 packets sent from an AP to an AC is set.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - WLAN 3 WLAN QoS Configuration
Issue 03 (2012-01-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
46