Huawei AR500 - Page 38

Featu
re
Sub-
Feature
Description Differ
ence
LAN Link
aggregation
Static link aggregation and Link Aggregation Control
Protocol (LACP)-based aggregation
None
LAN Port Group Permanent port group and temporary port group None
Interfa
ce
Mana
gemen
t
Physical
interfaces
Supports GE interfaces and 10GE interfaces by itself.
Supports 8ES2G, 8ES2GS and 8AS interface cards
Only
the
AR250
4E-H
support
s 10GE
interfac
es
Interfa
ce
Mana
gemen
t
Logical
interfaces
Ethernet Sub-interfaces, dialer interfaces, loopback
interfaces, NULL interfaces, VT interfaces, VE
interfaces and Tunnel interfaces
None
WAN DCC Circular DCC (C-DCC) and resource-shared DCC (RS-
DCC)
None
WAN PPPoE IPv4/IPv6 PPPoE Client None
IP
applic
ation
ARP Address resolution for Ethernet None
IP
applic
ation
IPv4/IPv6 IPv4 and IPv6 address management, TCP/UDP socket,
ICMP, ping and tracert, and UDP helper
None
IP
applic
ation
DNS IPv4/IPv6 DNS client, IPv4/IPv6 DNS proxy, and
dynamic DNS (DDNS) client
None
IP
applic
ation
DHCP IPv4/IPv6 DHCP client, IPv4/IPv6 DHCP relay, and
IPv4/IPv6 DHCP server, and DHCP security
None
IP
applic
ation
NAT NAT, port address translation (PAT), port application
mapping (PAM), Easy NAT, and NAT server, providing
application layer gateways (ALG) for each application
None
IP
applic
ation
Network
Quality
Analysis
(NQA)
Detecting the performance of protocols running on the
network
ICMP jitter test is not supported
None
IP
routin
g
IPv4 and
IPv6 Static
route
Basic routing functions None
Huawei AR500&AR510&AR530&AR550&AR2500
Series Industrial Switch Routers
Product Description
3 Product Characteristics
Issue 02 (2016-11-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
30