NOTE
l The outdoor LTE antenna, surge protector, and extension cables are not included in the installation
accessory package and need to be purchased separately.
l The pole where the outdoor LTE antenna is mounted is not delivered with the router.
l The diameter of the pole must be in the range of 30 mm to 40 mm.
l Select an N-M/N-M extension cable of 2 m, 3 m, or 5 m based on the distance between the pole and surge
protector.
l Use cable ties to bundle the extension cable on the pole and leave certain amount of slack.
Tools and Accessories
l LTE outdoor antenna
l Phillips screwdriver or flat-head screwdriver
l Multimeter
l Combination wrench
l Pole
l Extension cables
l Surge protector
Procedure
Step 1 Determine the position where the antenna will be installed on the pole.
Step 2 Fix the outdoor LTE antenna on the fixture (delivered with the antenna), and then mount the
antenna and fixture on the pole, as shown in Figure 3-1.
Figure 3-1 Mounting the antenna on the pole
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
3 Installing an AR500 Series Industrial Access Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
26
To Next Page
Loading...
