Numbe
r
Indicator Color Description
the 2.4 GHz
frequency
band)
Off: The WLAN link is shut down.
10 WLAN2
(working at
the 5.0 GHz
frequency
band)
Green Blinking: Data is being transmitted on the
WLAN link.
Off: The WLAN link is shut down.
11 SSD Red and
green
Steady green: A solid state drive (SSD) card is
available and accessible.
Steady red: The SSD card does not work
normally.
Off: No SSD card is available.
12 GE electrical
interface
indicator
Green Steady on: A link has been established on the
corresponding GE interface.
Blinking: Data is being transmitted or received
on the link.
Off: No link is established on the corresponding
interface.
Interface Description
RS232 interface
The RS232 interface can be connected to a data terminal for data transmission or to a console
for onsite configuration. Table 3-165 lists RS232 interface attributes.
Table 3-165 RS232 interface attributes
Attribute
Description
Connector type DB9 Female
Standards compliance RS232
Working mode Full-duplex Universal Asynchronous
Receiver/Transmitter (UART)
Data equipment type Data circuit-terminating equipment (DCE)
Cable type 6.7 RS232 Cable
3G/LTE antenna interface
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
3 Chassis
Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. 263
To Next Page
Loading...
