Table 3-261 Video interface attributes
Attribute Description
Connector type DVI-I socket
Signal types supported
l HDMI signal
l CVBS (composite video) signal
l YPbPr (analog component) signal
Cable type Video cable
Console Interface
The console interface of a router can connect to an operation terminal for onsite configuration.
Table 3-262 lists attributes of the console interface.
Table 3-262 Console interface attributes
Attribute
Description
Connector type Micro USB, B socket
Standards compliance USB 2.0
Working mode Full-duplex Universal Asynchronous Receiver/
Transmitter (UART)
Cable type Micro USB data cable
3G/LTE Antenna Interface
3G/LTE antenna interfaces of a router include a primary antenna interface and a diversity
antenna interface. The primary antenna interface receives and transmits 3G/LTE signals, and
the diversity antenna interface helps improve quality of received 3G/LTE signals. Table 3-263
lists attributes of a 3G/LTE antenna interface.
Table 3-263 3G/LTE antenna interface attributes
Attribute
Description
Connector type SMA-K (screw threads outside and a hole inside)
Standards compliance and
frequency bands supported
l FDD LTE: bands 1/2/3/5/7/8/20
l WCDMA/HSDPA/HSUPA/HSPA+: bands 1/2/5/8
l GSM/GPRS/EDGE: 850/900/1800/1900 (MHz)
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
3 Chassis
Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. 374
To Next Page
Loading...
