Interface Description
Console interface
The console interface can connect to an operation terminal for onsite configuration. Table
3-335 lists console interface attributes.
Table 3-335 Console interface attributes
Attribute
Description
Connector type RJ45
Standards compliance RS232
Working mode Full-duplex Universal Asynchronous
Receiver/Transmitter (UART)
Data equipment type Data circuit-terminating equipment (DCE)
Cable type 6.18 Console Cable
FE electrical interface
An FE electrical interface receives and transmits Ethernet services at 10 Mbit/s or 100 Mbit/s.
Table 3-336 lists FE electrical interface attributes.
Table 3-336 FE electrical interface attributes
Attribute
Description
Connector type RJ45
Standards compliance
l IEEE802.3
l IEEE802.3u
l IEEE802.3ab
Interface attribute MDI/MDIX
NOTE
l MDI stands for medium dependent interface,
an Ethernet interface connection mode.
Ethernet interfaces of most network interface
cards (NICs) are MDI interfaces.
l MDIX stands for medium dependent
interface crossover, a version of MDI. MDIX
interfaces are usually used on hubs or LAN
switches.
Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP
Network protocol IP
Cable type 6.6 Ethernet Cable
FE combo interface
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
3 Chassis
Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. 440