Attribute Description
Signal type Passive DI signals, Boolean value (short
circuit and open circuit)
Cable type 6.2.11 8-Pin Phoenix Connector
(RS485/DI)
3G-WCDMA antenna interface
The 3G-WCDMA antenna interface connects to a 3G-WCDMA antenna to receive and
transmit 3G signals. Table 3-369 lists 3G-WCDMA antenna interface attributes.
Table 3-369 3G-WCDMA antenna interface attributes
Attribute
Description
Connector type SMA-K (screw threads outside and a hole
inside)
Standards compliance
l UMTS
l EDGE/GPRS/GSM
Frequency bands supported UMTS: 2100/900 (MHz)
EDGE/GPRS/GSM: 1900/1800/900/850
(MHz)
Rate GSM CS:
l Uplink: 9.6 kbit/s
l Downlink: 9.6 kbit/s
GPRS/EDGE: Multi-slot Class 12, Class B
WCDMA CS:
l Uplink: 64 kbit/s
l Downlink: 64 kbit/s
WCDMA PS:
l Uplink: 384 kbit/s
l Downlink: 384 kbit/s
HSDPA: downlink rate of 3.6 Mbit/s
Network protocol GSM/GPRS/EDGE/WCDMA/HSDPA
Antenna type 6.3.1 3G Whip Antenna
ZigBee antenna interface
The ZigBee antenna interface connects to a ZigBee antenna to transmit and receive wireless
data. Table 3-370 lists ZigBee antenna interface attributes.
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
3 Chassis
Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. 468
To Next Page
Loading...
