Table 3-425 10GE optical interface attributes
Attribute Description
Connector type LC/PC
Interface attribute Optical modules supported:
l OSX010N05
Standards compliance IEEE802.3ae
Working Mode 1 Gbit/s and 10 Gbit/s auto-sensing, full-
duplex
2.5GE optical interface
A 2.5GE optical interface supports GE/2.5GE auto-sensing and is used for data transmission
and receiving at over 1 Gbit/s. Table 3-426 lists the attributes of a 2.5GE optical interface.
Table 3-426 2.5GE optical interface attributes
Attribute
Description
Connector type SFP
Standards compliance IEEE802.3z
Transmission speed 1000 Mbit/s, 2500 Mbit/s
Cable type Optical fiber (inserted in an optical module)
Optical Module type
l GE Optical Module
l 6GE Optical Module
USB interface
Do not remove the USB flash drive during a USB-based deployment. Otherwise, the system
will restart.
The USB interface supports USB 2.0 devices and provides upload and download speeds of
480 Mbit/s. You can use the USB interface to upload or download configuration and
application files to the flash memory. Table 3-427 lists USB interface attributes.
Table 3-427 USB interface attributes
Attribute
Description
Connector type TYPE-A
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
3 Chassis
Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. 524
To Next Page
Loading...
