Specifications
None
Pin Assignments
Table 6-4 lists the pin assignments of an eSATA power and signal cable.
Table 6-4 Pin assignments of an eSATA power and signal cable
Connector P1
Wire Color Connector
P2
Connector
P3
Remarks
P1 to P15 4, 5, 6 Black 4 - -
7, 8, 9 Red 3
10, 11, 12 Black 6
13, 14, 15 Yellow 1
S1 to S7 1 Ground wire - 1 -
2 Core wire 2 A pair
3 Core wire 3
4 Ground wire 4 -
Ground wire
5 Core wire 5 A pair
6 Core wire 6
7 Ground wire 7 -
Connection
An eSATA power and signal cable is connected as follows:
l The SAS connector at the P1 end is connected to an SATA hard disk.
l The 6-pin connector at the P2 end is connected to the SATA power jack on a router.
l The eSATA connector at the P3 end is connected to the eSATA interface on the router.
Ordering Information
Table 6-5 provides the eSATA power and signal cable ordering information.
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
6 Cables
Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. 643
To Next Page
Loading...
