Appearance and Structure
Figure 6-32 shows the structure of a Wi-Fi remote antenna (2x2).
Figure 6-32 Structure of a Wi-Fi remote antenna (2x2)
Technical Specifications
Table 6-64 lists technical specifications of a Wi-Fi remote antenna (2x2).
Table 6-64 Technical specifications of a Wi-Fi remote antenna (2x2)
Item
Specification
Connector type RP-SMA-J (Screw threads and hole inside)
Cable length 1 m
Frequency bands supported
l 2.4 GHz
l 5.0 GHz
Maximum gain 1 dBi
Standing wave ratio 2.5
Polarization Linear polarization
Direction Omnidirectional
Connection
A Wi-Fi remote antenna (2x2) is connected as follows:
l The SMA male connector is connected to the Wi-Fi interface on a router.
l The other end (cover) is attached to a plastic horizontal plane.
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
6 Cables
Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. 687
To Next Page
Loading...
