Huawei AR550 Series - Page 407

[Huawei] sysname RouterB
[RouterB-bridge2] bridge 2
[RouterB-bridge2] quit
# Add Ethernet1/0/0 and Ethernet2/0/0 to bridge group 2, and enable VLAN ID transparent
transmission on the two interfaces.
[RouterB] interface ethernet 1/0/0
[RouterB-Ethernet1/0/0] bridge 2
[RouterB-Ethernet1/0/0] bridge vlan-transmit enable
[RouterB-Ethernet1/0/0] quit
[RouterB] interface ethernet 2/0/0
[RouterB-Ethernet2/0/0] bridge 2
[RouterB-Ethernet2/0/0] bridge vlan-transmit enable
[RouterB-Ethernet2/0/0] quit
4. Configure Switch 2.
# Create VLANs.
<Huawei> system-view
[Huawei] sysname Switch2
[Switch2] vlan 11
[Switch2-vlan11] quit
[Switch2] vlan 12
[Switch2-vlan12] quit
# Add Ethernet1/0/1 to VLAN 11 and Ethernet1/0/2 to VLAN 12.
[Switch2] interface ethernet 1/0/1
[Switch2-Ethernet1/0/1] port link-type access
[Switch2-Ethernet1/0/1] port default vlan 11
[Switch2-Ethernet1/0/1] quit
[Switch2] interface ethernet 1/0/2
[Switch2-Ethernet1/0/2] port link-type access
[Switch2-Ethernet1/0/2] port default vlan 12
[Switch2-Ethernet1/0/2] quit
# Configure Ethernet1/0/3 to allow the packets from VLAN 11 and VLAN 12 to pass
through.
[Switch2] interface ethernet 1/0/3
[Switch2-Ethernet1/0/3] port link-type trunk
[Switch2-Ethernet1/0/3] port trunk allow-pass vlan 11 to 12
[Switch2-Ethernet1/0/3] quit
5. Verify the configuration.
After the preceding configurations are complete, User 1 and User 3 can ping each other;
User 2 and User 4 can ping each other.
Configuration Files
Configuration file of Router A
#
sysname RouterA
#
vlan batch 11 to 12
#
bridge 1
#
interface Ethernet1/0/0
bridge 1
bridge vlan-transmit enable
#
interface Ethernet2/0/0
bridge 1
bridge vlan-transmit enable
Huawei AR530&AR550 Series Industrial Switch Routers
Configuration Guide - Ethernet Switching
9 Transparent Bridging Configuration
Issue 01 (2014-11-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
393