Numbe
r
Indicator Color Description
1 PoE Green Steady on: The PoE power supply is normal.
Off: The system does not provide PoE power
supply.
2 USB Red and
green
Steady green: The system has been upgraded or
configured using a USB flash drive.
Blinking green: The system is being upgraded
or configured using a USB flash drive.
Steady red: The system fails to be upgraded or
configured using a USB flash drive.
Off: No USB flash drive is connected, the USB
interface has failed, or the indicator has failed.
3 WiFi 5G
(effective
when working
on the 5 GHz
band)
Green Steady on: A WLAN link has been established
Blinking: Data is being transmitted on the
WLAN link.
Off: The WLAN link is shut down.
4 WiFi 2.4G
(effective
when working
on the 2.4
GHz band)
Green Steady on: A WLAN link has been established
Blinking: Data is being transmitted on the
WLAN link.
Off: The WLAN link is shut down.
5 SSD Red and
green
Steady green: A solid state drive (SSD) card is
available and accessible.
Off: No SSD card is present.
Steady red: The SSD card is faulty and cannot
be used.
Off: The SSD card is working normally.
6 GE interface
indicators
(GE0 to GE3)
Green Steady on: A link has been established on the
corresponding interface.
Blinking: Data is being transmitted or received
on the corresponding interface.
Off: No link is established on the
corresponding interface..
7 PWR Green Steady on: The system power supply is normal.
Off: The system power is off.
8 SYS Red and
green
Slow blinking green: The system is running
properly.
Fast blinking green: The system is being
powered on or restarting.
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
3 Chassis
Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. 228
To Next Page
Loading...
