Connection
A 60 W open frame power supply cable is connected as follows:
l The 3-pin connector at the P1 end is connected to a 60 W open frame power supply.
l The C13 connector at the P2 end is connected to an external AC power source.
Ordering Information
Table 6-7 provides ordering information of the 60 W open frame power supply cable.
Table 6-7 Ordering information of the 60 W open frame power supply cable
Part Number
Description Remarks
04151261 Power Cable, 1.8m, 1.0mm^2, PISM,
227IEC53(RVV)1.0mm^2(3C), H3(3.96)-I
Mandatory
6.1.5 Power Adapter Plate Cable
Description
A power adapter plate cable connects a router to a power adapter plate. Its 4-pin connector is
connected to the 4-pin power jack on the router, and the cord end terminals are connected to a
Phoenix terminal block, which is connected to a power adapter plate.
Appearance and Structure
Figure 6-5 shows the structure of a power adapter plate cable.
Figure 6-5 Structure of a power adapter plate cable
Specifications
None
Pin Assignments
Table 6-8 lists the pin assignments of a power adapter plate cable.
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
6 Cables
Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. 645
To Next Page
Loading...
