Table 6-66 Technical specifications of a Wi-Fi remote antenna (3x3)
Item Specification
Connector type RP-SMA-J (screw threads and hole inside)
Cable length 1 m
Frequency bands supported
l 2.4 GHz
l 5.0 GHz
Maximum gain 1 dBi
Standing wave ratio 2.5
Polarization Linear polarization
Direction Omnidirectional
Connection
A Wi-Fi remote antenna (3x3) is connected as follows:
l The SMA male connector is connected to the Wi-Fi interface on a router.
l The other end (cover) is attached to a plastic horizontal plane.
Ordering Information
Table 6-67 provides the Wi-Fi remote antenna (3x3) ordering information.
Table 6-67 Wi-Fi remote antenna (3x3) ordering information
Part Number
Description Remarks
27012297 Omni-directional Antenna,2400~2500MHz/
5150~5850MHz,1dBi(2.4G)/1dBi(5G),
5W,RP-SMA-J
Optional
6.3.13 Wi-Fi Rod Remote Antenna
Description
A Wi-Fi rod remote antenna consists of a Wi-Fi rod antenna and a 3 m Wi-Fi feeder.
Appearance and Structure
Figure 6-34 shows the structure of a Wi-Fi rod remote antenna.
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
6 Cables
Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. 689
To Next Page
Loading...
