Huawei AR550 Series - 6.3.2 LTE Whip Antenna

To Next Page

To Previous Page

Technical Specifications

Table 6-34 lists the technical specifications of a 3G whip antenna.

Table 6-34 Technical specifications of a 3G whip antenna

Item Specification

Connector type SMA male connector (pin and screw threads

inside)

Frequency bands supported 824 MHz to 960 MHz/1710 MHz to 2170

MHz

Maximum gain 1 dBi/2 dBi

Standing wave ratio < 3

Polarization Vertical

Direction Omnidirectional

Connection

A 3G whip antenna connects to the 3G antenna interface of a router.

Ordering Information

Table 6-35 provides the 3G whip antenna ordering information.

Table 6-35 3G whip antenna ordering information

Part Number

Description Remarks

27010809 Isotropic Antenna,

824-960/1710-2170MHz,

1dBi/2dBi, Vertical, Omni,

5W, 0r, SMA-Male, Do not

need Bracket

Standard configuration

6.3.2 LTE Whip Antenna

Description

LTE whip antennas are connected to the LTE main and diversity antenna interfaces of a

router. LTE whip antennas are recommended in desk mounting and wall mounting scenarios.

Appearance and Structure

Figure 6-18 shows the appearance of an LTE whip antenna.

Huawei

AR500&AR510&AR531&AR550&1500&AR2500

Industrial Switch Routers

Hardware Description

6 Cables

Other manuals for Huawei AR550 Series