Figure 6-34 Structure of a Wi-Fi rod remote antenna
Wi-Fi Extension Cable
NOTE
The Wi-Fi feeder of a Wi-Fi rod remote antenna is 3 m long by default. If this length is not enough for
antenna connection, use a Wi-Fi extension cable to extend the length.
When using a Wi-Fi extension cable, connect its male connector to the SMA female
connector of the Wi-Fi rod antenna SMA and its female connector to the router, as shown in
Figure 6-35.
Figure 6-35 Connection of a Wi-Fi extension cable
SMA, female SMA, female
Male
WiFi extension cable
Technical Specifications
None
Connection
A Wi-Fi rod remote antenna is connected as follows:
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
6 Cables
Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. 690
To Next Page
Loading...
