77
Sharing data
Turning on Huawei Beam
1.
On the home screen, touch then the
All
tab.
2.
Under
WIRELESS & NETWORKS
, touch
More...
.
3.
Touch the
NFC
switch to turn on NFC.
4.
Touch
NFC
then
Huawei Beam
.
Sharing a web page or contact through Huawei Beam
Before you use Huawei Beam to share a web page or contact, ensure that
both phones are on and unlocked and that NFC and Huawei Beam are
enabled.
1.
Select the web page or contact you want to share.
2.
Place the two phones back to back. After a connection is set up, the
phones play a tone, and the web page or contact screen shrinks.
3.
Touch the shrunken screen to display its information on the other phone.
Connecting your phone to a computer
MTP mode
MTP mode lets you transfer media files, such as photos, songs, and videos,
between your phone and a computer. Windows Media Player 11 or later is
required.
1.
Use a USB cable to connect your phone to the computer.
2.
On the
USB connection methods
screen, touch
Device file manager (MTP)
.
The phone driver is then automatically installed on the computer.
3.
After the driver is installed, open the new drive and begin transferring
media files between your phone and computer. Multimedia content on
your phone can only be viewed through Windows Media Player.
HiSuite mode
HiSuite is a file transfer application developed by Huawei that lets you back
up, synchronize, and transfer data between your phone and computer.
To Next Page
Loading...
