9
6 Additional information
If you are experiencing any issues with the router:
Restart the router.
Refer to the help section on the web-based management page.
Restore the router to its factory settings.
Contact your network service provider.
Please visit http://consumer.huawei.com/en/support/hotline for recently
updated hotline and email address in your country or region.
7 FAQs
How do I restore factory settings?
When the router is turned on, press the reset button for approximately 3
seconds using a pointed object until the
indicator starts to blink.
Restoring factory settings will clear all customized settings. Proceed with
caution.
How can I connect to the router using Wi-Fi Protected Setup (WPS)?
To connect a WPS-enabled device to your router using the WPS button:
1. Press and hold the WPS button on the router for at least 2 seconds until
the
indicator starts to blink.
2. Enable WPS on your device within 2 minutes to connect to the router's
Wi-Fi network.
The illustrations in this guide are for reference purposes only and may not
reflect the exact appearance of your product. Please contact your network
service provider for more detailed information.
To Next Page
Loading...
Need help?
General
