Huawei B628-265 - Page 12

HUAWEI B628-265 LTE CPE
Product Description
2 Technical Specifications
Issue01 (2020-05-09)
Huawei Proprietary and Confidential
Copyright © Huawei Device Co., Ltd.
4
Item
Description
LED Indicators

Three signal strength indicators
Green: Strong
Yellow: Moderate/Weak

One Wi-Fi indicator (Green)
On: Wi-Fi is enabled.
Flash slowly: A pairable HiLink device is detected
Flash quickly: HiLink pairing is in progress/WPS connection is in progress.
Off: Wi-Fi is disabled.
 The indicator starts to flash slowly only when B628-265 detects a new
HiLink device.
 HiLink devices include Honor routers, Honor set-up boxes, Honor
handsets/ HUAWEI handsets (EMUI 5.0 and later), and more.

One power indicator (Green)
Off: Power off.
On: Power on.
Flash: Restoring factory settings
Buttons

One Power ON/OFF switch

One H button
The Wi-Fi indicator flashes slowly when the router detects a HiLink device.
Press the H button to connect the HiLink device to the router's Wi-Fi.
When the Wi-Fi indicator is steady on, press the H button to enable WPS.
If you accidentally pressed the H button and the Wi-Fi indicator starts to flash,
wait for it to stop flashing. This may take about two minutes.

One Reset button
Maximum
transmit power
LTE
B1/3/7/8/20/28/32/38/41: 22.5 dBm+3.2/-2.2 dB
UMTS
B1/8: 22.5 dBm+3.2/-2.2 dB
Wi-Fi
2.4GHz
802.11b
14 dBm
802.11g
15.5 dBm
802.11n
15.5 dBm
5GHz
5G LF（±2 dB）
*Some edge band
power is reduced
5G MF（±2 dB）
*Some edge band
power is reduced
5G HF（±2 dB）
*Some edge band
power is reduced
Ant0
Ant1
Ant0
Ant1
Ant0
Ant1
11a 6M
15.5dBm
15.5dBm
15.5dBm
15.5dBm
22dBm
22dBm
11a 54M
15.5dBm
15.5dBm
15.5dBm
15.5dBm
19dBm
19dBm
11n 20M
MCS0
15.5dBm
15.5dBm
15.5dBm
15.5dBm
22dBm
22dBm