Huawei B628-265 - 2.3 Software Specifications

HUAWEI B628-265 LTE CPE
Product Description
2 Technical Specifications
Issue01 (2020-05-09)
Huawei Proprietary and Confidential
Copyright © Huawei Device Co., Ltd.
10
2.3 Software Specifications
Table 2-6 Software specifications
Item
Description
LTE features
DL 4x4 MIMO+2CC
DL 64QAM, UL 16QAM
Mobile
network
APN management
APN auto adapter
Gateway
Router

Supports the default route: 192.168.8.1

Supports manual configuration of LAN IP addresses

Supports Address Resolution Protocol (ARP)
DHCP server

The DHCP server can be enabled or disabled

The address pool of the DHCP server can be
configured

The lease can be configured

The DNS relay under the DHCP server can be
enabled
NAT

Supports NAT and NAPT (compliant with
RFC2663, RFC3022, and RFC3027)

Supports cone NAT
ARP
ICMP
IPv4v6 dual stack
IPv6 only (Optional , CLAT for LAN side IPv4 device access Internet)
IPv4 only (Optional)
When the CLAT function is enabled, the IPv4 device Internet access
service cannot reach the maximum throughput. Under IPv6 only,
NAT-base service (such as port forwarding and port triggering) is not
available
VPN pass-through
VPN client

Support L2TP VPN client

Support PPTP VPN client
SMS

Writing/sending/receiving

Writing/sending/receiving extra-long messages