Huawei eA380-123 - Update Introduction; 5.1 Local Update; 5.2 Online Update

eA380 Series LTE CPE
User Guide
5 Update Introduction
Issue 01 (2017-08-31)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
45
5 Update Introduction
About This Chapter
This chapter describes three methods of updating the eA380 software. If a new version is
detected, the system informs users to upgrade the software.
5.1 Local Update
Prerequisites:

The LTE CPE is powered on and you have successfully logged in to the WebUI.

A commercial software release for the LTE CPE is obtained.
Procedure:
Step 1 On the WebUI, choose Update > Local Update.
Step 2 On the displayed Local Update page, click Browse… and upload the file.
Step 3 Click Update to complete the LTE CPE upgrade.
----End
5.2 Online Update
Prerequisites:
The LTE CPE is powered on and you have successfully logged in to the WebUI.
Procedure:
Step 1 On the WebUI, choose Update > Online Update.
Step 2 On the Configuration and Updates page, set Server IP, Server port, and Server virtual
directory. Then, click Apply.