20
Interface or
Button
Description
RESET
You can press and hold the RESET button for over six seconds to
restore the default settings of the HG531.
Note: After you restore the default settings, your customized data
is lost. Therefore, use this function with caution.
ADSL It is used to connect to the MODEM interface on the splitter.
WPS
It is used to set up a wireless connection between the HG531 and a
wireless terminal easily and safely.
WLAN It is used to enable or disable wireless network function quickly.
ON/OFF
It is the power switch and is used to power on or power off the
HG531.
7.3
Default Settings
Parameter Setting
IP address of the LAN interface 192.168.1.1
Subnet mask of the LAN
interface
255.255.255.0
User name used for logging in to
the Web-based configuration
utility
admin
Password used for logging in to
the Web-based configuration
utility
admin
DHCP server function Enable
Wireless network function Enable
To Next Page
Loading...
