n Tap Call log, select a call record, tap , and then tap Initiate video
surveillance.
n Tap Contacts. Select a contact number to view the details and initiate video
surveillance.
c. During video surveillance, you can set the following parameters:
n Loudspeaker
n Rotatable component. The video display ratio remains unchanged with a
screen-adaptive width.
d. After video surveillance is complete, tap the End key on the home screen.
----End
5.5.3 Video Distribution
This section describes operations related to video distribution performed on an EP820.
Procedure
l Answering a Video Distribution
a. When a video distribution is incoming, the home screen of an EP820 displays call
initiator information. Press
or slide to receive the
distribution.
b. After a video distribution is connected, the screen for video distribution is
displayed.
n You can set the loudspeaker using a key.
n The video display ratio takes one of the following settings: 144x176 (QCIF),
288x352 (CIF), 480x720 (D1), 720x1280 (720P), 1080x1920 (1080P).
c. A video distribution automatically ends when it is complete. You can also tap the
End key on the home screen to terminate a video distribution.
l Making a Video Distribution
Only a dispatcher operator can initiate video distribution. No operations are required at
the terminals.
----End
5.5.4 Video Sending
This section describes operations related to video sending performed on an EP820.
Context
On the home screen of an EP820, tap
to enter the video sending application.
l Table 5-5 describes the icons in the top bar.
EP820
User Guide
5 Operation and Maintenance
Issue 05 (2016-06-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
31
To Next Page
Loading...
