Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Step 3 Press "F2", On the displayed page, select Create Virtual Drive, as shown in Figure 3-5.
Figure 3-5 Selecting a Create VD
Step 4 Users can perform RAID configuration according to the requirements specific parameter, as
shown in Figure 3-6.
Figure 3-6 Selecting a configuration parameter
RAID Configuration Parameter Item Description:
RAID Level: RAID level representing the configuration, such as RAID 1,RAID-5, RAID-50;
PD per Span: This Configuration items in the user selects RAID-50 or RAID-60 level after,
it config the number of the hard disks packet, e.g. RH2288H V3 Broadwell Sizing 6T
configuration, the configuration 18 hard disks for HANA Storage, RAID level is RAID-50,
"PD per Span "parameter should be set to "9";
To Next Page
Loading...
