Button Item Function
Enter
button
Conrm to enter the menu or conrm to set a
parameter value
The backlight lasts 120s after you press any button.
Prerequisites
The SmartLogger has been powered on.
The screenshots in this section are taken from SmartLogger V100R001C00SPC118.
Procedure
Step 1 On the default screen, tap to access the main menu screen.
Figure 3-7 Main Menu
Step 2 Select a menu as required, and enter to access the corresponding operation
screen.
● The Settings and Maintenance pages are available only after you log in to the system.
● The initial password is 000001.
FusionSolar Smart PV Solution-Device Replacement
Commissioning Guide 3 Software Download or Platform Login Methods
Issue 01 (2021-04-30) Copyright © Huawei Technologies Co., Ltd. 13
To Next Page
Loading...
