Huawei FusionSolar SmartPVMS - Page 33

NO TICE
When a faulty SmartLogger3000 is replaced with a new SmartLogger3000, the
les do not include certicate-related les. After all les are imported, you need to
reload the third-party certicate on the WebUI if required.
----End
Setting Parameters on the LCD
NO TE
● Conguration export and import needs to be performed using a USB ash drive.
SanDisk, Netac, and Kingston USB
ash drives are supported. USB ash drives of other
brands are not tested for compatibility and may not be recognized.
● The SmartLogger1000 can be maintained locally on the LCD.
Step 1 Install the USB ash drive to the SmartLogger1000.
Step 2 Export
congurations on the LCD of the SmartLogger1000.
Figure 5-6 Exporting SmartLogger1000
congurations
Step 3 Insert the USB ash drive that stores the exported les into the USB port on the
new SmartLogger3000.
Step 4 Log in to the app and import data.
FusionSolar Smart PV Solution-Device Replacement
Commissioning Guide
5 Replacing the SmartLogger3000/
SmartLogger2000/SmartLogger1000A/
SmartLogger1000 with the SmartLogger3000
Issue 01 (2021-04-30) Copyright © Huawei Technologies Co., Ltd. 29