Procedure
● If FE communication is used, you can directly replace the Smart Dongle
without resetting.
● If WLAN communication is used, log in to the app and enter the WLAN
password.
Figure 6-3 Connecting to the router
6.2.2 SmartPVMS or Third-Party Management System Settings
6.2.2.1 SmartPVMS
Step 1 Log in to the SmartPVMS and navigate to the Device Management page.
FusionSolar Smart PV Solution-Device Replacement
Commissioning Guide 6 Replacing a Smart Dongle
Issue 01 (2021-04-30) Copyright © Huawei Technologies Co., Ltd. 34
To Next Page
Loading...
