Projection with Miracast
Screen Projection
This function allows you to project content from
Android and Windows devices to a large screen in
wireless projection mode.
Method
Note
1. Keep Wi-Fi and WLAN Direct enabled on the
large screen, and enable Wi-Fi on your phone.
To enable Wi-Fi and WLAN Direct for a large
screen, go to Settings > Advanced > Network
Connection > Wi-Fi from the lower right corner
of the large screen's home screen.
2. On the home screen of the large screen, tap
Projection. On the displayed screen, tap in
the upper right corner, choose Advanced, and
enable Multi-Screen Interaction and Projection
with Miracast.
3. From the search list, select an available large
screen device to start projection.
• When your device is connected using the
Miracast projection function, you need to
confirm the connection on the large screen.
• When your phone functions as a hotspot to
provide network access for the large screen,
Miracast projection is unavailable on the
phone.
• Required operating systems: Android 8 or
later, Windows 10 or later.
• This function applies only to endpoints that
support the Wi-Fi function.
To Next Page
Loading...
