Huawei LampSite - Page 19

LampSite Solution
Product Description
2 Hardware Architecture
01 (2013-11-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15
Indicator
Color
Status
Description
Steady off
There is no power input, or the pRRU is
faulty.
Blinking on for
1s and off for 1s
The pRRU is working properly.
Blinking on for
0.125s and off for
0.125s
The pRRU is loading software, configuring
data, not working, or the software is in
security version.
ALM
Red
Steady on
Alarms have been generated, and the pRRU
must be replaced.
Blinking on for
1s and off for 1s
An alarm has been generated. This may be
caused by a fault on the module or a port.
Therefore, the module may have to be
replaced.
Steady off
No fault is detected.
RU1
Red or
green
Steady green
The RU1 card is online but not providing
services.
Blinking green
on for 1s and off
for 1s
The RU1 card is running properly.
Steady off
The RU1 card is not installed.
Steady red
The RU1 card is faulty.
RU2
Red or
green
Steady green
The RU2 card is online but not providing
services.
Blinking green
on for 1s and off
for 1s
The RU2 card is running properly.
Steady off
The RU2 card is not in position.
Steady red
The RU2 card is faulty.
RU3
Red or
green
Steady green
The RU3 card is online but not providing
services.
Blinking green
on for 1s and off
for 1s
The RU3 card is running properly.
Steady off
The RU3 card is not in position.
Steady red
The RU3 card is faulty.
CPRI_E0
Green
Steady on
The CPRI link is functioning properly.
Steady off
The CPRI link is not functioning properly
or faulty.